Conserve valuable PCI Express (PCIe) server slots while adding multi-port Gigabit Ethernet capability with the Intel PRO/1000 PT Quad Port Server Adapter. The dedicated I/O bandwidth of PCIe ensures priority performance on each port, without bus sharing, for Gigabit Ethernet connectivity in Category-5 networks. The Intel PRO/1000 PT Quad Port Server Adapter improves performance in multi-processor systems by balancing network loads across multiple central processing units (CPUs). Additionally, the Intel PRO/1000 PT Quad Port Server Adapter enables Intel I/O Acceleration Technology (Intel I/OAT) for faster I/O processing on the new Intel Xeon processor-based servers.
The Intel PRO/1000 PT Quad Port Server Adapter is supported by Intel PRO Intelligent Installer and the new Intel PROSet Utility for Windows Device Manager. Intel PROSet simplifies adapter installation and gives you point-and-click power to configure and manage your Intel PRO Network Connections for connectivity you can count on.
Key Features
Two Intel 82571GB Gigabit Controllers Load balancing on multiple CPUs Intel I/O Acceleration Technology (Intel I/OAT) Virtualization Interrupt moderation Compatible with x4, x8, and x16 full-height PCI Express slots Support for most network operating systems (NOS) Remote management support Category-5 unshielded twisted pair (UTP), 4-pair cabling RoHS compliant, lead-free technology Intel PROSet Utility for Windows Advanced cable diagnostics, Intel backing
Request more information Send to a friend View all networking
-
Compatible Operating Systems
FreeBSD
Microsoft Windows 2000
Microsoft Windows 2003
Novell Netware 5.x, 6.x
Red Hat Enterprise Linux (RHEL) 2.4x or later (32- and 64-bit)
SCO Open Server 5, OpenUNIX 8
Sun Solaris x86, OS 8 and later
-
Controller/IOP
Intel 82571GB (x2)
-
Data Transfer Rate
10 Mbps (per port)
100 Mbps (per port)
1000 Mbps (per port)
-
Input/Output
4 x RJ45 LAN ports
-
Interface
PCI-E 1.0
-
LED indicators
4 (1/port, link and speed) solid and blinking
-
Management
Advanced configuration and power interface (ACPI) 1.0 power management
Diagnostics (loopback, testability, PHY register access)
DMI 2.0 support, Windows Management Instrumentation (WMI) and SNMP-manageable SMBus support
PXE 2.0 enabled through boot read-only memory (ROM)
Remote Installation Services (RIS)
Wake on LAN support over PCI Express
Wired for Management (WfM) baseline v2.0 enabled for servers
-
Manufacturer
Intel
-
Network Connection Type
10BASE-T
100BASE-TX
1000BASE-T
-
Operating Temperature
0°C ~ +55°C
-
Other Features
Adapter fault tolerance (AFT)
Adaptive load balancing (ALB)
Fast EtherChannel (FEC)
Gigabit EtherChannel (GEC)
IEEE 802.1p
IEEE 802.1Q VLANs
IEEE 802.3 (z,ab,u,x) flow control support
IEEE 802.3ad (link aggregation control protocol)
Interrupt moderation
Multiple teams
PCIe Hot Plug/Active peripheral component interconnect (PCI)
Switch fault tolerance (SFT)
TCP checksum offload (TCP, UDP, IP)
TCP segmentation/large send offload
Teaming support
Test switch configuration
-
Power Consumption
12.096W (12V @ 1.008A)
-
Regulatory
BSMI
C-Tick
CE Mark
FCC B
MIC
UL
VCCI
-
Wiring
Category-5, unshielded twisted pair (UTP), 4-pair